| MSL-C07 |
Specifications & Description |
| Material |
ABS & PS |
| Solar Cell |
Mono-crystalline Silicon 10V/250mA |
| Light Source |
45pcs of super bright white LEDs |
|
Storage Component
|
Ni-MH AA 4.8V/3600mAh battery |
| Light Mode |
Three choice modes of the switch: ON, OFF, AUTO |
| Other Specifications |
Work temperature: -25℃ to +75℃; Installation Height: 1-3 M; Work delay time: 2~5 sec (min), 1min+10sec(max); Detection Distance: 8m max(<24℃); Detection range: 180°; Power adapter: DC7.8V 400mA |
| Work Time |
3.5 hrs |
| Life Time |
Over 20 years |
| Features |
1. It adopts solar energy to power supply itself .It doesn’t need to dig for laying wire and it can be installed anywhere.
2. 45pcs white high luminance LEDS are used as lamp-house.
3. To make users convenient, they can adjust solar energy part and the lamp head freely: solar energy part can be adjusted horizontally 360 angles/backwards 90 angles; sensor lamp head can be adjusted horizontally 180 angles/onwards&backwards 120 angles.(see the below figure)
4. Low voltage indication: the red indicator light will flicker when accumulator voltage is 4V.It means the battery voltage is deficient and the light will darkle. Then the light will die when the voltage is less than 4V.
5. In AUTO Mode, Work delay time can be adjusted from 2seconds to1 minute. Light can be adjusted from less than 10 LUX to over 2000LUX |
